Claim Center

Claim Center reads your wallets and shows every fee they can claim on Solana in one place: Token-2022 transfer tax, creator fees from your launches, swap fees on your LP positions, and the rent held in empty token accounts. One button claims the tax, creator and LP positions that are ready. Rent is counted here, and a second button takes you to Close Account to get it back.

Claim Center j.tools/en/tools/claim-center

Open tool

Claim Center 0.75–4% Platform fee

Open tool

Platform fee

0.75–4% of what each claim moves

Network fee, rent and transaction value are separate.

When this tool fits

#when-this-tool-fits

• You launched tokens on Pump.fun, PumpSwap or Raydium LaunchLab and want the creator fees they earned without opening each vault.
• You hold concentrated LP positions and want their swap fees collected in the same pass.
• You are the withdraw authority of a Token-2022 mint with a transfer fee and want the withheld tax swept to your wallet.
• You run many wallets and want one table of what each of them is owed, with a single claim for all of them.
• You want to see how much rent your empty token accounts are holding before you close them.

Before you start

#before-you-start

• A connected wallet (how to connect), or the Local Signer, to scan and claim for one wallet.
• For many wallets, their private keys. Press Import and paste one key per line. The keys stay in this tab’s memory, the server only sees public addresses, and a reload forgets them.
• SOL in every wallet that signs, for the network fees. The platform fee is also paid in SOL inside the claim transaction, so a wallet sweeping Token-2022 tax (which arrives as tokens, not SOL) needs that fee in its balance too.

Use only short-lived operational wallets; never enter a seed phrase or a long-term wallet key.

Use

• Only short-lived operational wallets

Never enter

• A seed phrase
• A long-term wallet key

How to use it

#how-to-use-it

1. Add the wallets

   Connect your wallet, or press Import and paste the private keys of the wallets you want to read. The scan starts on its own and needs no signature.

2. Read the numbers

   With one wallet, the figure at the top is the SOL value of everything ready right now, with a bar and a chip for Tax, Creator and LP, and the positions listed under it. With an imported set you get a table instead: one row per wallet, with its Tax, Creator, LP and Rent amounts and a total.

3. Claim in one press

   Ready positions are selected for you. Untick anything you want to leave, then press the claim button. The connected wallet asks you to sign each transaction, and imported wallets sign in the tab. For the rent, press the Rent → Close Account button.

Key settings

#key-settings

• Wallet source: Wallet or Local Signer reads one wallet. Import adds a set of wallets by private key, and while that set exists it takes over the page. Clear removes it.
• Rescan: Reads every source again for the same wallets. The page also rescans on its own after a claim run.
• Position list (one wallet): Every tax, creator and LP position with its source, pending amount and status. Only positions marked Ready can be selected.
• Ready only (imported set): On by default. Hides wallets that have nothing ready.
• Min ≥ (imported set): A wallet whose ready total is below this amount in SOL is not claimed. With Ready only on it is also hidden. Default 0.001.
• Select all / None: Selects every ready wallet in the table, or clears the selection. Wallets that cannot sign here are marked “no key” and cannot be selected.
• Source chips and column headers: Tax, Creator and LP each link to their own tool, where you can pick claims one by one.
• How it works: Opens a short animated explainer of the scan, the claim and the fee.

Fees and costs

#fees-and-costs

Caution

About fees. Every action has two costs: the Solana network fee paid to validators, and the J Tools platform fee. The platform fee always shows in the app before you confirm, and nothing is charged until you sign. Fees can change over time, so trust the in-app summary rather than a number you saw once.

Cost	Amount
J Tools platform fee	0.75% of a creator or LP claim, 4% of a Token-2022 tax sweep (at least 0.05 SOL). Scanning is free.
Solana network fee	Paid to validators during the transaction; shown in the live summary.
Rent and transaction value	Shown separately when required; not part of the platform fee.

The fee is a SOL transfer inside the claim transaction itself, so a claim that does not land charges nothing. A creator or LP claim worth less than about 0.13 SOL, or one with no known price, pays no platform fee. A tax sweep always pays at least 0.05 SOL, so Claim Center only selects a sweep worth more than that. Claim Center adds no fee of its own on top: each claim pays the rate of the tool that owns it, Creator Fee Claim, LP Fee Claim or Token-2022 Tax Collector. Rent goes through Close Account, which keeps 5% of the rent it reclaims.

How it works

#how-it-works

• Four sources per wallet. Tax covers the Token-2022 mints a wallet holds and is the withdraw authority for. Creator covers the creator vaults on Pump.fun, PumpSwap and Raydium LaunchLab. LP covers positions on Raydium CLMM, Meteora DLMM, Meteora DAMM v2 and Orca Whirlpool. Rent counts the empty token accounts a wallet could close.
• States. The ones you will see most are Ready, Below the fee (too small to claim, so it is listed but never selected), Nothing, and Compounds. Standard Raydium and PumpSwap pools add their swap fees back into the pool, so those positions show Compounds and there is nothing separate to claim.
• The scan reads public data only. Addresses go to the server in groups of ten wallets. When a source misses a read, only that part is asked again before the page reports it.
• Every claim is rebuilt at claim time. The server reads the chain again for each selected position and builds its transaction. A position that changed since the scan is skipped, and the result banner says how many were skipped.
• One transaction at a time, in order. The connected wallet shows a prompt for each one. Imported wallets sign without a prompt. Rejecting a prompt stops the run, and so does the connected wallet running out of SOL for fees. Any other failure costs only its own row. Each run is written to the Activity Log.

Before you sign

#before-you-sign

Check the live summary before signing. The app is the current source of truth for amount, fee and route.

Common issues

#common-issues

• A chip shows a warning mark. That source did not answer, even after a second read. Press Rescan. The other chips still show real numbers.
• The claim button stays disabled. Either nothing is selected, or the connected wallet cannot pay the network fees. The notice beside the button says how much SOL to add.
• Some claims were skipped. Those positions changed between the scan and the claim, for example they were already claimed. Rescan to see what is left.
• A position says Below the fee. Its value does not justify a claim here. A small tax balance can still be swept by hand in Token-2022 Tax Collector, where the fee is shown before you sign.
• An LP position says Compounds. Its fees sit inside the pool. Withdraw liquidity with Liquidity Add / Remove to take them out.
• A Token-2022 mint you control is missing. Claim Center only looks at mints the wallet itself holds a token account for, and at most three of them per wallet. Scan the mint directly in Token-2022 Tax Collector.
• An imported wallet fails with not enough SOL. Each imported wallet pays its own network fees. Send it a little SOL and claim again.

Practical tips

#practical-tips

• Import once. The imported set stays in the tab, so Creator Fee Claim, LP Fee Claim, Token-2022 Tax Collector and Close Account can use it without asking for the keys again.
• Raise Min ≥ on a large set. Wallets with a tiny total cost more in network fees than they return.
• Finish with the rent. With an imported set, the rent button opens Close Account on that same set. It sends each wallet’s rent back to that wallet, and when no wallet is connected each wallet pays its own gas.

Related tools

#related-tools

• Creator Fee Claim
• LP Fee Claim
• Token-2022 Tax Collector
• Close Token Accounts

Note

About wallet warnings. Some tools bundle several instructions into one transaction, for example creating a token and its metadata together. Phantom can show a caution banner for these transactions, and where the tool tells you to expect one, it does not mean something is wrong. Read what you are signing, then approve if it matches what you set up. If a warning appears that the tool did not mention, decline it and tell support.

Tip

J Tools is non-custodial. We never store your wallet’s private keys and never ask for your seed phrase. Every transaction you approve in a connected wallet is signed inside that wallet, and its key never reaches our servers. A few multi-wallet tools do let you paste private keys for throwaway hot wallets, which stay in your browser tab and sign there. Holder Booster is the one tool that hands a key to our worker: the fresh distributor wallet it creates for each run, sent encrypted. Never paste a key tied to long-term holdings, and if a page ever asks for your seed phrase, stop and close it.

Help

#help

Fees and safety · All tools · Support